Purpose

This article outlines the process for utilizing the Product Spotlight feature in ADM. This feature is for locations with Stockwell and Pico Vision devices only.
 

Process

The Product Spotlight feature allows for a few selected products to be featured on the Cooler Vision devices while the devices are idling.

1. Log into ADM.
    
2. Navigate to the desired location to set up a Product Spotlight.
    
3. Select Product Spotlight tab at the bottom.
   
   
4. Click Add Product.
    
5. Select product to spotlight.
    
6. Click Next. This will load up the spotlight details page for the selected product. From this page the display order can be set (for use with multiple spotlights), images can be uploaded, and a preview of the spotlight can be viewed.
   
   
7. Set the order of display. This will default to 1 for the first product. The products will automatically be rotated every 4 seconds from first to last.
    
8. Upload an image (optional). If no image is uploaded the default image shown on the modal will be utilized.
   1. Images can be moved or resized using the modal on the right. The image can be resized using the corner handles. 
      
      
9. Click Save Product to add the Product Spotlight. This will navigate back to the location tab where all the active Product Spotlights can be viewed or edited.