HelpCenter

Explore
Parlevel - Actineon PC - Configuring a Network
Updated

Purpose

The purpose of this article is to provide the steps required to access the network configuration settings on an Actineon CPU. 

Process

These steps are important to note, as the kiosk’s menu is accessed and has different options for an Actineon than a Premio or Zotac CPU.

  1. First click on the screen to bring focus to it.

  2. Press CTRL + F to minimize the application. The application will close and a black screen will appear with the mouse icon.

  3. Click on the black area of the screen and then right click with the mouse when the menu opens. Terminal Emulator and Net config should be available.

  4. Select Net config. Determine the type of network to set up, ethernet or wireless. Ethernet should be plug and play unless a static IP address is needed. If you would like to set up a wireless network then continue.

    1. Using the arrow keys, highlight Activate a Connection, then press Enter.

    2. Use the arrow keys to highlight the desired network, then select it with Enter.

    3. If prompted to authenticate the network with a password or encryption key, do so and then press Enter.

    4. Use the tab key to highlight Quit and press Enter.


The wireless network is now configured. Restart the kiosk application and verify the network status on the hardware test page.