This article outlines all of the networking requirements that are needed to accommodate a REVO DVR system.
Please contact 365 Support at 888-365-6282 or email@example.com if you have any questions related to this document.
To view more network requirements for our various products, click here.
REVO DVR systems require port forwarding for remote viewing of the camera system. All communication is routed directly to the REVO camera system from our router. The cameras can be viewed from the revodvr.com website with the network name setup on the DVR system.
For V5 kiosks running a Meraki Z1 or Z3 router, we utilize split-tunneling to force DVR traffic over the internet instead of through our hardware VPN. The REVO DVR should always be plugged into the highest numbered LAN port on the Meraki
- On a Meraki Z3 router, the split-tunnel is on LAN port 5
- On a Meraki Z1 router, the split-tunnel is on LAN port 4:
|REVO DVR||Remote Viewing (Inbound)||Inbound connection mapped to the IP address of the router.||
TCP: 8016, 8116, 8200, 10019, 12088
|8-26-2021||MS||Created article & verified accuracy.|