Equipment
- Scale
- Scale Display
Setup
- Remove the scale from the box.
- Connect the yellow Ethernet cable to the “COM” port on the scale.
- Connect the Power adapter.
- The display is already connected – leave the back Disp port empty.
- Place the scale on a flat surface near the cash drawers.
ADM Settings
Products must have the Unit Of Measure, Weigh and Tare Weight values set. The Tare Weight will vary depending on the size of the container.
Kiosk SFE must have the Scale value set to Serial Port. Serial Scale Port should be set to /dev/ttyS0. This can be auto populated by changing Scale to USB Port and back to Serial Port, without saving settings, if the field is blank.